TG U-Bolt flip kit.

[grant collins]

I bought a TG U bolt flip kit and the U-bolts dont fit very well. The rears have a big gap between the bolt and the housing, the front drivers side doesn't touch on the bottom. Anybody running theses and do you have any problems with stuff moving around?

[Yotadude]

Hey Grant i personally have ran the tg flip kit setup and also experienced the massive gap, as far as movement i never had an issue they work just fine, i was at coreys not to long ago and he's putting together a runner and we were taliking about the trail gear flip kit not fitting well and he recommended marlin crawler supposively they fit much better and look alot cleaner, hopefully this helps you out! if your not picky on how it looks just run it they never moved on me but be sure to recheck the u-bolts after your first three runs or so

[Ed Bister]

Originally Posted by grant collins

I bought a TG U bolt flip kit and the U-bolts dont fit very well. The rears have a big gap between the bolt and the housing, the front drivers side doesn't touch on the bottom. Anybody running theses and do you have any problems with stuff moving around?

I just got your message give me a call I will tell you how I did mine for 30 bucks

[grant collins]

Originally Posted by Ed Bister

I just got your message give me a call I will tell you how I did mine for 30 bucks

For $30 I can just get new U-Bolts.
I'm just going to take back the TG bolts and get new ones made.
The plates I got were made by Warrior and are much thicker than TG.

[grant collins]

The Warrior plates from Billy Bobs and U Bolts from Right Way Spring work perfect.